Card making, rubber stamping techniques and project videos for papercrafters

Laurie Morris's Blog (4)

Keeping card lining in place for motion cards

Hi Everyone,

For those of you who were wondering how i kept the lining of my "Up and Away" card in place, here is my secret.

First of all, you will need one of these. I purchased mine from Stampin' Up (no longer available unfortunately) so if you don't have one and can't find one elsewhere you'll have to improvise.

Next you will need to…


Added by Laurie Morris on February 28, 2013 at 7:30pm — 1 Comment

Napkins rings

Here is my first attempt at a tutorial. I thought I'd share with you how I made my woven napkin rings. I hope you all like it.

I started by using the left over tubing from a roll of wrapping paper and 40mm score tape.

I wrapped a piece of tape around the end of the tube and cut the tube even with the tape.…


Added by Laurie Morris on March 4, 2012 at 1:03am — 3 Comments

Napkin rings part 2

Continue wrapping the woven paper around entire tube as shown.

Cut the excess paper off.

Using glue dots, fold the tabs in and glue them to the inside of the tube.…


Added by Laurie Morris on March 4, 2012 at 1:00am — 2 Comments

Coffee filter roses

Here is a simple rose that I made using a coffee filter. I cut 5 flowers with Spellbinder's Rose Creation die cutting set. I used two different sizes for this flower.

The three bottom layers are the same size. The top two layers are the same and slightly smaller than the bottom flowers. After cutting out the five flowers, I cut a small circle out of card stock…


Added by Laurie Morris on March 3, 2012 at 1:40am — 3 Comments

© 2019   Created by Gina Krupsky.   Powered by

Badges  |  Report an Issue  |  Terms of Service